0055 00 3
Amercoat 385 #27 haze grey is supplied in two parts.
Stir base paint (Amercoat 385 #27) and hardener containers separately.
Combine hardener with base paint and stir well.
Apply one coat of Amercoat 385 #27 haze gray epoxy paint (topcoat) in accordance with procedures outlined in
Cold temperatures or high humidity will retard drying time.
Allow topcoat to air dry hard, approximately 16 hours at 70°F.
APPLY DECK GRIP COATING TO INTERMEDIATE SECTION NON-POWERED MODULE
EXTERIOR STEEL SURFACES
Mask off area to coated.
Do not apply anti-skid coating to air test plug ports, lift castings and shackles and
Application temperature range limits are 40° - 120°F.
No coating should be done if the surface is likely to be damaged by rain, fog, dew or dust,
etc., during the drying period.
Using nylon roller, paint tray and brush, apply one coat of Amercoat 385 AS anti-skid coating to deck surface.