TM 55-1945-205-24-4
0055 00 3
0055 00
2.
Disassemble the female guillotine connector assembly.
a.
Remove guillotine connector bar (8).
{1} Remove bolt (9), nut (10) and friction plates (11).
{2} Pry up on the guillotine connector bars (8) using a crowbar.
b.
Remove guillotine connector bars (8) from guillotine lock housings (12).
INSPECT AND REPAIR/REPLACE INTERMEDIATE SECTION NON-POWERED MODULE
MALE AND FEMALE GUILLOTINE CONNECTORS
1.
Inspect male connector pins (5) for cracks, cuts or corrosion. If damaged, replace connector pins.
2.
Inspect deployment springs (7) for cracks, cuts or corrosion. If damaged, replace deployment springs.
3.
Inspect guillotine connector bars (1, 8) for cracks, cuts or corrosion. If damaged, repair or replace guillotine
connector bars (1, 8).
4.
Inspect guillotine connector male and female lock housings (6, 12) for cracks, cuts or corrosion. If damaged,
replace guillotine connector lock housings (6, 12).
5.
Inspect guillotine connector assembly friction plates (4, 11) for cracks, cuts or corrosion. If damaged, replace
friction plates (4, 11).
9
10
8
12
11