0003 00 16
The corner fenders are installed on protruding seaward corners of the trident pierhead, while the cylindrical fenders
are installed around the seaward perimeter of the trident pierhead and on the two sides of the trident pierhead
extension. The configuration depicting all fenders is shown below.
There are two types of fenders which are components of the FC. These fenders are cylindrical type and corner type.
Cylindrical Type: There are three sizes of cylindrical shaped fenders that are components of the FC. The cylindrical
fenders are constructed of rubber and are used for stand-off from the FC. The three sizes are 3 ft diameter by 5 ft long
(3 ft X 5 ft), 4 ft diameter by 12 ft long (4 ft X 12 ft), 5 ft diameter by 10 ft long (5 ft X 10 ft). The fenders each have
25 ft of ½ in. chain attached at each end for securing to the trident pierhead modules.