TM 5-1940-277-34
ALTERNATOR REPAIR INSTRUCTIONS
(Continued)
LOCATION
ITEM
ACTION
REMARKS
c.
Check fit of
bearing (32)
into housing.
d.
If bearing is
not tight fit
when pressed-
in replace end
shield.
8.
Brush box
a.
Inspect for
assembly (9)
Cracks,
Brushes (36)
moving freely
in slots,
Brush (36)
length, min.
0.312 in (8 mm).
b.
Replace if any
defects noted.
9.
Stator (25)
a.
Examine wind-
ings visually
to ensure they
are properly
secured and
insulation is
undamaged.
b.
Check leads for
mechanical
soundness and
condition of
insulation.
2-69
