TM 5-1940-277-34
ALTERNATOR REPAIR INSTRUCTIONS
(Continued)
LOCATION
ITEM
ACTION
REMARKS
d.
Clamp entire
assembly
lightly in
soft jawed
vise.
e.
Tighten each
Use flat tip
screw progres-
screwdriver and
sively in
hammer.
turn while
lightly tap-
ping end shield
with hammer.
17.
Alternator (1)
a.
Woodruff key
Fit into position.
(15)
b.
Fan (14)
Slide onto shaft.
c.
Pulley (13)
Slide onto shaft.
d.
Washer (12)
Slide onto shaft.
e.
Nut (11)
Screw on, torque
Use torque
to 40 ft-lb
wrench, 15/16 in
(5.3 kg/m).
socket.
f.
Shaft (35)
Tap with non-
metallic hammer
then spin rotor
to check for free
rotation.
g.
Brush box
Assemble to slip
assembly (9)
ring end shield
and gasket
(26).
(10)
2-81
