Engine

ENGINE WIRING HARNESS REPLACEMENT INSTRUCTIONS (Continued) - TM-5-1940-277-34_134

ENGINE WIRING HARNESS REPLACEMENT INSTRUCTIONS (Continued) - TM-5-1940-277-34_136

TM-5-1940-277-34 Boat Bridge Erection Twin Jet Aluminum Hull Model USCSBMK1 (1940-01-105-5728) Manual
Page Navigation
118

TM 5-1940-277-34 ENGINE WIRING HARNESS REPLACEMENT INSTRUCTIONS (Continued) LOCATION ITEM ACTION REMARKS 7. Engine a. Tachometer Connect. Ring terminals. leads (6) Use 7 mm socket. b. Thermostart Connect. Push on terminals leads (5) c. High tempera- Connect. Push on terminals ture sending leads (4) d. Low oil pres- Connect. Push on terminals sure leads (3) e. Oil pressure Connect. Ring terminals. sending leads Use 7 mm socket. (2) f. Water temper- Connect. Push on terminals ature sending leads (1) 8. Starter (7) a. Three small Connect. Use 1/2 in leads to R- socket. (negative) terminal b. Two small Connect. Use 1/2 in leads to B+ socket. (positive) terminal c. Lead to small Connect. Use 8 mm socket. S terminal d. Two small Connect. Use 8 mm socket. leads to small R terminal 2-105

Privacy Statement
Press Release
Contact