REMOVAL - TM-5-1940-277-34

CONTROL BOX REPLACEMENT INSTRUCTIONS (Continued) - TM-5-1940-277-34_172

CONTROL BOX REPLACEMENT INSTRUCTIONS (Continued) - TM-5-1940-277-34_174

TM-5-1940-277-34 Boat Bridge Erection Twin Jet Aluminum Hull Model USCSBMK1 (1940-01-105-5728) Manual
Page Navigation
156

TM 5-1940-277-34 CONTROL BOX REPLACEMENT INSTRUCTIONS (Continued) LOCATION ITEM ACTION REMARKS REMOVAL 1. Battery Control box (3) a. Remove four Use 10 mm socket compartment nuts (1) and with extension. four washers Use 10 mm open (2). end wrench. b. Pull control The control box box (3) off is easier to work four studs on in this posi- (4) and place tion. on top of battery covers. c. Remove four Use flat tip screws (5), screwdriver. four washers (6) and con- trol box cover (7). d. Remove two Use flat tip screws (8) screwdriver. and voltage regulator box cover (9). Change 1 2-147

Privacy Statement
Press Release
Contact