TM 5-1940-277-34
TURBOCHARGER REPAIR INSTRUCTIONS
(Continued)
LOCATION
ITEM
ACTION
REMARKS
DISASSEMBLE
1.
Turbocharger (1)
a.
Turbocharger
Clamp in vise
(1)
on turbine inlet
flange (27).
b.
Compressor
Scribe (mark) for
housing (2),
correct alinement
core assembly
on reassembly.
(3), turbine
housing (4)
c.
8 capscrews
Remove.
Use 7/16 in
(5), 8 washers
socket with
(6), 8 lock-
ratchet.
washers (7)
and compressor
housing (2)
d.
"V" clamp (8)
Loosen lock nut
Use 7/16 in open
and core
(9) and remove.
end wrench.
assembly (3)
e.
Oil drain
Remove.
Use 1-1/4 in box
tube (10)
wrench.
and nut (11)
2.
Center core
a.
Nut (12) and
Remove.
Use 1/2 in box
assembly (3)
compressor
wrench.
wheel (13)
b.
Snap ring
Remove.
Use snap ring
(14)
pliers.
c.
Insert (15)
Remove.
Use two screw-
drivers as levers
2-233
