TM 5-1940-277-34
TRANSMISSION OIL PUMP REPLACEMENT INSTRUCTIONS
(Continued)
LOCATION
ITEM
ACTION
REMARKS
b.
Oil seal (7)
Apply sealant to
Seal must be
outside diameter
pressed into
of seal. Install
housing squarely
with seal lip
using arbor
toward inside of
press and
housing. Press
suitable tool.
seal into
Keep any sealant
housing until
off sealing
front face of
element and wipe
seal is flush
off any excess
with front face
sealant after
of pump housing.
seal is installed
NOTE
Before next step lubricate all parts with transmission fluid.
5.
Transmission (3)
a.
Front pump
Apply sealant
gasket (5)
and install.
b.
Woodruff
Install.
key (6)
c.
Drive gear
Install with one
(4)
of the key slots
in gear mating with
key on shaft and
match marks alined.
2-341
