TM 5-1940-277-34 STEERING ASSEMBLY REPAIR INSTRUCTIONS - SCOOP CONTROL ROD REPLACEMENT (Continued) LOCATION ITEM ACTION REMARKS REMOVAL 1. Ball joint a. Nut (2) Remove the Use 13 mm and pivot (1) smaller nut on 17 mm wrenches. pivot.  It is on ball end. b. Ball joint Slip joint off (3) pivot. 2. Scoop control a. 2 lock nuts Loosen nuts on Use 17 mm wrench. rod (4) (5) both ends of Nut on end next rod. to fixed nut has left hand threads. b. Fixed nut Use to unscrew (6) rod from fork. c. Ball joint Unscrew from Has left hand (3) rod. thread. d. Lock nut (5) Remove from rod. INSTALLATION 3. Scoop control a. 2 lock nuts Screw nuts on One nut has left rod (4) (5) both ends of hand thread.  If rod. it does not fit easily on one end try other. b. Ball joint Screw on rod. Put on end with (3) fixed nut. c. Scoop control Screw rod into Use 17 mm wrench. rod (4) fork end. 2-393