TM 5-1940-277-34
CAMSHAFT AND CAMSHAFT BEARING INSPECTION AND REPLACEMENT INSTRUCTIONS
(Continued)
LOCATION
ITEM
ACTION
REMARKS
REMOVAL (MK-2)
1.
Engine
a.
Crankshaft pulley (4)
Remove
Use 15/16" socket,
assembly (1)
and bolt (5).
hinged handle, and
gear puller.
b.
Timing gear
Remove.
Use 1/2 in
housing front
socket and
cover (6),
ratchet.
gasket (7),
19 bolts (8)
and 19 washers
(9)
2.
Camshaft (10)
a.
Bolt (11) and
Remove bolt and
Use 1-7/8 in
camshaft
pull gear off
socket, hinged
gear (12)
shaft.
handle and gear
puller.
b.
Camshaft
Remove from
key (13)
shaft.
c.
Thrust
Remove from
washer (14)
shaft and dis-
and collar
card.
(15)
d.
Refer to
page 3-79.
Change 7 3-77