TM 5-1940-277-34
CAMSHAFT AND CAMSHAFT BEARING INSPECTION AND REPLACEMENT INSTRUCTIONS
(Continued)
LOCATION
ITEM
ACTION
REMARKS
c.
Fit new oil
seal with seal
lip toward in-
side of cover.
d.
Fit gasket (7)
and cover (6)
to housing (21).
NOTE
A bolt tightening sequence for cover bolts is not required.
e.
Install 19
Use 1/2 in socket
washers (9)
and ratchet.
and bolts (8).
f.
Crankshaft
Fit onto crank-
pulley (4)
shaft.
g.
Crankshaft
Screw in.
Use 15/16 in soc-
nose bolt (5)
Torque to 240
ket and torque
ft-lb (33.20
wrench.
kgfm).
3-85 (3-86 Blank)
