TM 5-1940-277-34
TROUBLESHOOTING PROCEDURES (Continued)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
12.
STEERING SYSTEM FEELS LOOSE
Step 1.
Check for loose or improperly adjusted steering cables and linkage (refer to TM 5-1940-277-20).
Step 2.
Check for worn bushings and bearings (refer to page 2-409).
Step 3.
If bushings or bearings are all right and adjusted correctly contact supervisor.
13.
SCOOP CONTROLS ARE HARD TO OPERATE
Step 1.
Check steering assembly brush for wear (refer to TM 5-1940-277-20).
Step 2.
Check control cables for damage (refer to TM 5-1940-277-20).
Step 3.
Check rotary control assembly for defective bearings (refer to page 2-409).
Step 4.
If controls still hard to operate contact supervisor.
Change 1 2-18.1
