TM 5-1940-277-34
TRANSMISSION REPAIR INSTRUCTIONS
(Continued)
LOCATION
ITEM
ACTION
REMARKS
NOTE
The drive gear-clutch hub subassembly must be placed in an assembly tool before proceeding
with next step. Place subassembly so that drive gear rests on tool and clutch hub is on top.
c.
Ring gear
a.
Pick up and
(13) subassem-
place over
bly as put
drive gear.
together in
steps 29,
30, 31.
b.
Lower subassem-
bly until inter-
nal teeth of
clutch plates
begin to engage
teeth on for-
ward clutch
hub.
3-145
