INSPECTION AND REPAIR (cont) - TM-5-1940-277-34

HYDROJET ASSEMBLY REPAIR INSTRUCTIONS-TWO STAGE DRIVE SECTION (cont) - TM-5-1940-277-34_620

HYDROJET ASSEMBLY REPAIR INSTRUCTIONS-TWO STAGE DRIVE SECTION (cont) - TM-5-1940-277-34_622

TM-5-1940-277-34 Boat Bridge Erection Twin Jet Aluminum Hull Model USCSBMK1 (1940-01-105-5728) Manual
Page Navigation
604

TM 5-1940-277-34 HYDROJET ASSEMBLY REPAIR INSTRUCTIONS-TWO STAGE DRIVE SECTION (Continued) LOCATION ITEM ACTION REMARKS c. Replace if cracked, stepped, discolored from overheating or not thick enough. 12. Reverse thrust a. Inspect for washer (21) cracks, visible steps between used and unused portion, or discoloration. b. Measure washer Use feeler gage. thickness. Thickness should be .0414 to .0374 inch (1.05 to 0.95 mm). c. Replace if cracked, stepped, discolored from overheating or not thick enough. 13. Front thrust a. Inspect for washer (14) cracks, visible steps between used and unused portion or discoloration. b. Measure washer Use feeler gage. thickness. Thickness should be not less than .3115 inch (7.91 mm). 3-193

Privacy Statement
Press Release
Contact