TM 5-1940-322-24
0012 00
LUBRICATION INSTRUCTIONS (Contd)
FILTERS
Filters shall be serviced, cleaned, or changed as applicable when they are known to be contaminated or
clogged. Service is recommended at prescribed hard-time intervals.
AOAP REQUIREMENTS
The BEB is not currently enrolled in the Army Oil Analysis Program (AOAP).
CLEANING
WARNING
Skysol 100 mixture is combustible; DO NOT use or store near heat,
sparks, flame, or other ignition sources. Use mechanical ventilation
whenever product is used in a confined space, heated above
ambient temperatures, or agitated. Keep container sealed when not
in use.
Contact with Skysol 100 may cause skin irritation. Use chemical-
resistant gloves. In case of skin contact, remove any contaminated
clothing and wash skin thoroughly with soap and water. Wash
contaminated clothing before reuse. Eye contact may cause
irritation, tearing, or blurring of vision. Use face shield or goggles
when eye contact may occur. In case of eye contact, flush eyes with
large amounts of water for at least 15 minutes or until irritation
subsides. Inhalation may cause irritation to upper respiratory
passages. DO NOT have food or drink in the vicinity. Failure
comply so may result in injury to personnel.
CAUTION
Keep container covers clean and free of dust, dirt, or other foreign
material. Keep all lubrication equipment clean and ready to use.
Failure to comply may result in damage to equipment.
External parts not requiring lubrication should be kept clean and
free of lubricants. Failure to comply may result in damage to
equipment.
Clean fittings before lubricating equipment. Use Skysol 100 to clean dirt and grease from all lubrication
points. Dry lubrication points before lubricating. After servicing lubrication points, clean excess lubricants
to prevent accumulation of foreign matter.
0012 00-2
