TM 5-1940-322-24
0095 00
WATER PUMP MAINTENANCE (Contd)
NOTE
The water pumps on both engines are replaced the same way. This
procedure covers the replacement of one water pump.
REMOVAL
Remove two screws (4), water pump (2), and gasket (3) from engine (1). Discard seal (3).
CLEANING AND INSPECTION
1. For general cleaning and inspection instructions, refer to WP 0013 00.
2. Clean gasket mating surfaces with parts cleaning brush.
INSTALLATION
1. Install water pump (2) and new gasket (3) on engine (1) with two screws (4). Tighten screws (4) to
18 lb-ft (24 Nm).
5. Start engine and check for leaks (TM 5-1940-322-10).
6. Close engine hatches (TM 5-1940-322-10).
1
~
2
3
4
END OF WORK PACKAGE
0095 00-2