TM 5-1940-322-24
0111 00
VIBRATION DAMPER REPLACEMENT (Contd)
NOTE
The vibration dampers on both engines are replaced the same way.
This procedure covers the replacement of one vibration damper.
REMOVAL
Remove four screws (3) and vibration damper (2) from crankshaft (1).
INSTALLATION
1.
Secure vibration damper (2) on crankshaft (1) with four screws (3). Tighten screws (3) to
92 lb-ft (125 Nm).
2.
Install drivebelt (WP 0086 00).
3.
Install belt guard (WP 0085 00).
4.
Close engine hatches (TM 5-1940-322-10).
1
3
2
END OF WORK PACKAGE
0111 00-2
