TM 5-1940-322-24
0162 00
TIMING PIN AND HOUSING REPLACEMENT (Contd)
NOTE
Port and starboard engine timing pins and housings are replaced
the same way. This procedure covers the replacement of one timing
pin and housing.
REMOVAL
1. Remove two screws (5), timing pin (4), housing (1), and gasket (6) from engine gear housing (7).
Discard gasket (6).
2. Remove timing pin (4) and O-ring (2) from timing pin housing (1). Discard O-ring (2).
3. Remove retaining ring (3) from timing pin housing (1). Discard retaining ring (3).
INSTALLATION
1. Install new retaining ring (3) in timing pin housing (1).
2. Apply coat of grease to new O-ring (2) and install new O-ring (2) and timing pin (4) in timing pin
housing (1).
3. Install new gasket (6) and timing pin housing (1) with timing pin (4) on engine gear housing (7) with
two screws (5). Tighten screws (5) to 48 lb-in. (5 Nm).
4. Close engine hatches (TM 5-1940-322-10).
3
2
1
4
5
6
7
END OF WORK PACKAGE
0162 00-2