TM 5-1940-322-24P
0001 00
ITEM Column. The item number is that number assigned to the item as it appears in the figure referenced
in the adjacent figure number column.
SPECIAL INFORMATION
USABLE ON CODE. The usable on code appears in the lower left corner of the Description column
heading. Usable on codes are shown as "UOC: . . . . . . ." in the Description Column (justified left) on the
first line applicable item description/nomenclature. Uncoded items are applicable to all models. Identification
of the usable on codes used in the RPSTL are:
Code
Used On
M2S
MKII-S
Fabrication Instructions. Bulk materials required to manufacture items are listed in the Bulk Material
Functional Group of this RPSTL. Part numbers for bulk materials are also referenced in the description
column of the line item entry for the item to be manufactured/fabricated. Detailed fabrication instructions
for items source code to be manufactured or fabricated are found in TM 5-1940-322-24.
Assembly Instruction. Detailed assembly instructions for items source coded to be assembled from
component spare/repair parts are found in TM 5-1940-322-24. Items that make up the assembly are listed
immediately following the assembly item entry or reference is made to an applicable figure.
Kits. Line item entries for repair parts kits appear in group 9401 KITS in the repair parts list work packages.
Index Numbers. Items which have the word BULK in the figure column will have an index number shown
in the item number column. This index number is a cross-reference between the National Stock Number/Part
Number Index and the bulk material list in the repair parts list work packages.
Associated Publications. The publications listed below pertain to the MKII-S Bridge Erection Boat (BEB)
and their components:
TM 5-1940-322-10
Operator's Manual
TM 5-1940-322-24
Technical Manual Field and Sustainment Maintenance Manual
Illustrations. Item numbers on illustrations have been assigned in clockwise sequence, starting at the
11 o'clock position (upper left).
The NSN's for the Field, and Sustainment Special Tool Kit are listed on WP 0172 00 of the TM 5-1940-322-24
manual.
HOW TO LOCATE REPAIR PARTS
When National Stock Number or Part Number is Not Known.
(1) First. Using the table of contents, determine the assembly group or subassembly group to which
the item belongs. This is necessary since figures are prepared for assembly groups and subassembly groups,
and listings are divided into the same groups.
(2) Second. Find the figure covering the assembly group or subassembly group to which the item belongs.
(3) Third. Identify the item on the figure and use the Figure and Item Number Index to find the NSN.
When National Stock Number or Part Number is Known.
(1) First. Using the Index of National Stock Numbers and Part Numbers, find the pertinent
National Stock Number or Part Number. The NSN index is in National Item Identification Number (NIIN)
sequence (see 4.a.(1)). The part numbers in the Part Number index are listed in ascending alphanumeric
sequence (see 4.b.). Both indexes cross-reference you to the illustration figure and item number of the item
you are looking for.
(2) Second. After finding the figure and item number, verify that the item is the one you're looking
for, then locate the item number in the repair parts list for the figure.
END OF WORK PACKAGE
0001 00-5
