TM 5-5420-202-20-2
MANIFOLD HEATER (LEFT AND RIGHT) REPLACEMENT (Sheet 2 of 3)
REMOVAL:
1. Using 3/4 inch wrench, disconnect
ignition lead (A) from spark plug
(B).
NOTE
Use suitable drip pan to catch fuel
spillage whenever any fuel line or
fitting is loosened or removed.
Using ?/16 inch wrench, disconnect fuel input tube (C) from elbow (D).
2.
3.
Using 9/16 inch wrench, disconnect fuel return tube (E) from elbow (F).
Using 1/2 inch wrench, remove four nuts and washers (G).
4.
Remove manifold heater (H) and gasket (J). Throw gasket away.
5.
6.
Using 7/1 6 inch wrench, remove elbow (F).
Using 1/2 inch wrench, remove elbow (D).
7.
8.
Using 9/16 inch wrench, remove bushing (K).
Inspect all items disconnected or removed for
9.
cracks, nicks, or other damage. Replace as
necessary.
TA248401
Go on to Sheet 3
7 -2 7 7
