TM 5-5420-202-20-3
ENGINE DISCONNECT WIRING HARNESS REPLACEMENT (Sheet 2 of 6)
NOTE
Some vehicles may have a cable tie
instead of strap (C). If your vehicle
has a cable tie, remove it and go on
to step 4.
NOTE
Strap and covers should be left in
place by removing only one screw.
If replacement of strap is required,
remove both screws.
Using 7/16 inch wrench, remove screw
2.
(D), lockwasher (E), and flat washer (F)
from strap (C).
Using 7/16 inch wrench, remove screws
3.
(G), lockwashers (H), and flat washers
(J) from three straps (K).
Go on to Sheet 3
101296.8
5- -0
Change 7
