TM 5-5420-202-20-4
LEFT DISCHARGE VALVE, TUBES, AND RELATED PARTS REPLACEMENT
(FIXED FIRE EXTINGUISHER) (Sheet 5 of 5)
NOTE
When installing clamps in step 2, position clamps down.
2.
Using socket, loosely install three clamps
(A), screws (B), and washers (C) securing
line (D) to left fuel tank (clamps must remain
loose for positioning during installation)
3.
Using 7/8 or 1-1/8 inch wrench, install connector on tube (E) to elbow (F). Using 7/8
or 1-1/8 inch crowfoot, extension and torque wrench, tighten tube (E) to 40-50 lb-ft
(54-75 N m).
4.
Using socket, tighten three screws (B) securing clamps (A) to fuel tank.
5.
Holding adapter (G) with 3/4 inch wrench and using 7/8 inch crowfoot adapter and torque
wrench, tighten connector (G) onto adapter (H) to 40-50 lb-ft (54-75 N m).
6.
Using 7/8 or 1-1/8 inch wrench to hold connector (J), use torque wrench and 7/8 or 1-1/8
inch crowfoot to tighten connector (K) to 40-50 lb-ft (54-75 N m).
7.
Install powerplant (page 5-14).
End of Task
TA248738
20-80
