TM 5-5420-203-14
B-3. EXPLANATION OF COLUMNS IN THE MAC, SECTION II - CONT.
e. Column 5, Tools and Equipment. Column 5 specifies, by code, those common tool sets
(not individual tools) and special tools, TMDE, and support equipment required to perform the designated
function.
f. Column 6, Remarks This column shall, when applicable, contain a letter code, in alphabetical
order, which shall be keyed to the remarks contained in section IV.
B-4. EXPLANATION OF SPECIAL IDENTIFIERS USED IN SECTION II
Maintenance functions identified by an asterisk (*) will have tools identified in the appropriate
DMWR.
B-5. EXPLANATION OF COLUMNS IN TOOL AND TEST EQUIPMENT
REQUIREMENTS, SECTION III
a. Column 1, Reference Code. The tool and test equipment reference code correlates with a
code used in the MAC, section II, column 5.
b. Column 2, Maintenance Category. The lowest category of maintenance authorized to use
the tool or test equipment.
c. Column 3, Nomenclature. Name or identification of the tool or test equipment.
d. Column 4, National Stock Number. The National Stock Number of the tool or test
equipment.
e. Column 5, Tool Number. The manufacturer's part number.
B-6. EXPLANATION OF COLUMNS IN SECTION IV
a. Reference Code. This column consists of a letter code in alphabetic order which is keyed to
column 6 of Section II.
b. Remarks. This column lists information pertinent to the maintenance function being performed,
as indicated on the MAC, Section II.
B-3
