TM 5-5420-209-12
3-11. Rear Winch Assembly and Motor.
This task covers:
a. Service (Model 11-S-EL)
b. Service (Model P6115-043R)
INITIAL SETUP
Tool
General Mechanic’s Automotive Tool Kit
(Item 1, Appendix B)
Materials/Parts
Oil, Lubricating OE/HDO 10 (Item 8, Appendix E)
Rags, Wiping (Item 12, Appendix E)
Equipment Condition:
Bay removed (para. 2-16).
a. Service (Model 11-S-EL). (figure 3-6)
WARNING
When working under boom, support boom by blocking or other suitable means.
(1) Raise boom (1) to vertical position and block in place.
(2) Remove fill plug (2) and check fluid level. Fluid level should be up to bottom of fill hole. Add fluid as needed.
(3) Install fill plug (2).
(4) Removal blocking and lower boom (1).
3-14
