TM 5-5420-209-12
4-80. Foldlock.
This task covers: Replace
INITIAL SETUP
Tool
General Mechanics Automotive Tool Kit
(Item 1, Appendix B)
Materials/Parts
Grease, Automotive and Artillery (Item 2, Appendix E)
Equipment Condition:
Bay removed (para. 2-16).
NOTE
The bay has two foldlocks. The maintenance procedures are the same for both.
a. Replace. (figure 4-106)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
Unlatch (open) foldlock (1).
Remove cotter pin (2) and remove pin (3).
Remove spring support (4), washer (5), outside spring (5), inside spring (7), washer (8), pin (9), and foldlock
(1).
Remove two cotter pins (10), washers (11), and remove pin (12).
Apply grease to pins (3) and (12).
Install foldlock (1) and secure with pin (12), two washers (11), and cotter pins (10).
Install pin (9) in foldlock (1).
Install washer (8), inside spring (7), outside spring (6), and washer (5) on spring support(4) and install spring
Support (4).
Install spring support (4) and secure with pin (3) and cotter pin (2).
4-272