TM 5-5420-209-12
APPENDIX G
TORQUE LIMITS
G-1 .
General. Table G-1 provides torque Iimits to be observed when installing and attaching hardware.
Table G-1. Torque Limits.
Attaching Part
Range
Final Drive Housing Screws
75 ft-lb (101.6 Nm)
Primary Drive Housing Screws
75 ft-lb (101.6 Nm)
Spring Cover Screws
35 ft-lb (47.4 Nm)
Rear Hinge Pin Screw
120-132 ft-lb (162-179 Nm)
Front Hinge Pin Screw
120-132 ft-lb (162-179 Nm)
Hinge Pin Links Screws
120-132 ft-lb (162-179 Nm)
Latch Receptacle Screws
31-34 ft-lb (4246 Nm)
Roadway Connector Screws
120-132 in-lb
Lower Trunnion Nut Screws
106-117 ft-lb (144-159 Nm)
Upper Trunnion Nut Screws
31-34 ft-lb (4246 Nm)
Hydraulic Motor Gear Housing Screws
265 ft-lb (359 Nm)
Hydraulic Motor Cover Screw
45-50 in-lb (5-5.6 Nm)
G-1/(G-2 blank)
