TM 5-5420-226-20-2
MANIFOLD HEATER FUEL FILTER AND INPUT FUEL LINE REPLACEMENT (Sheet 5 of 8)
Fuel Filter Replacement (Sheet 5 of 5)
Connect two fuel lines (G) to tee (H). Using 7/16 inch wrench, tighten fuel line nuts.
8.
Connect tube assembly (J) to adapter
9.
(B). Using 1/2 inch and 5/8 inch
open end wrenchs, tighten tube nut
to adapter.
10.
Connect electrical lead (K) to solenoid valve (D). .
11.
Operate purge pump (TM 5-5420-226-10) and check for fuel leaks. If leaks are found,
tighten connections as required.
12.
Install engine access covers (pages 17-15 and 17-17).
TA107866
End of Task
7-259