TM 5-5420-226-20-3
ENGINE OIL TEMPERATURE TRANSMITTER REPLACEMENT (Sheet 2 of 3)
REMOVAL:
1. Place rags under transmitter.
2. Using 1/2 inch wrench, remove
self-locking nut and clamp (A).
3. Pull socket of rubber insulated connector (B) from
switch cap (C).
4. Using 15/16 inch wrench, remove transmitter
(D) from engine.
5. Check interior and protruding part of transmitter
socket (E) for cracks and crossed threads. Replace
if necessary.
INSTALLATION:
1. Lightly coat threads of new transmitter with sealing compound.
TA168876
Go on to Sheet 3
10-225