TM 5-5420-226-20-3
MAIN POWER WIRING HARNESS DISCONNECT (Sheet 3 of 7)
4.
Using 7/16 inch socket and ratchet remove 4 screws (K) washers (L) and 4 clamps securing harness from right side
of vehicle to vehicle slave receptacle.
5.
Using 7/16 inch socket and ratchet, and 7/16 inch wrench remove 2 screws (N) washers (P) and nuts (Q) from slave
receptacle cover (R).
6.
Remove slave receptacle cover (R).
7.
Using 9/16 inch wrench remove screw (S) and lockwasher (T) from slave receptacle (U) and
main power wiring harness (D) (CKT 49).
Go to next page
Change 6
10-296.83
