TM 5-5420-226-20-3
TRANSMISSION SIDE OIL STRAINER ASSEMBLY SERVICE (Sheet 3 of 8)
5. Using 1/2 inch socket, extension, and 1/2 inch
wrench, remove six nuts and lockwashers (E)
securing oil filler tube (C) to transmission.
6. Remove oil filler tube (C) from transmission.
7. Using putty knife, remove strainer (F)
and two gaskets (G) off mounting studs.
Throw gaskets away.
8. Using two 5/16-18 jack screws and
1/2 inch socket to tighten jackscrews
alternately remove side oil strainer
assembly (H).
9. Using putty knife, remove gasket (J).
Throw gasket away
TA169100
Go on to Sheet 4
11-99
