TM 5-5420-226-20-3
MASTER BRAKE CYLINDER MOUNTING BRACKET, TIE ROD, PUSH ROD, CLEVIS, AND
BOOT REPLACEMENT (Sheet 3 of 9)
2.
Using 9/16 inch wrench, remove four
screws (B) and four lockwashers (C).
3.
Using 9/16 inch wrench, remove four screws
(D) and four lockwashers (E).
4.
Pull boot (F) loose from rear of master
cylinder (A).
5.
Remove bracket (G) by lifting up and
pulling gently to the right.
6.
Using vise with copper caps on vise
jaws, place bracket (G) in vise.
7.
Remove and dispose of boot (F).
Go on to Sheet 4
TA169151
13-21
