TM 5-5420-227-24
MASTER RELIEF VALVE (RV1) ADJUSTMENT (Sheet 2 of 2)
NOTE
Correct pressure is 3800 50 psi (26220 340 kPa).
8.
Using wrench, remove adjusting screw cap (B).
To adjust relief valve pressure, hold adjusting screw (C) with 3/16 inch screw key and
9.
use wrench to loosen jamnut (D). Using 3/16-inch screw key, turn adjusting screw ( C )
clockwise to increase pressure or counterclockwise to decrease pressure.
10.
Repeat steps 3 through 9 until pressure gage shows reading of 3800 + 50 psi (26220
340 kPa).
11.
Holding adjusting screw (C) with 3/16 inch screw key, use wrench to tighten jamnut
(D).
12.
Using wrench, install adjusting screw cap (B).
Remove pressure gage.
13.
14.
Using 1/4 inch screw key, install plug (A).
TA170297
End of Task
3-71