TM 5-5420-228-24
HEU OR EARLY MODEL OVERHEAD CYLINDER REPLACEMENT (Sheet 3 of 7)
N
P
10. Using snap ring pliers, remove two retaining
rings (N).
11. Using hammer and drift, remove pin (P).
12. Using 1-5/16 inch socket, remove 10 screws
(Q), lockwashers (R), and two retainers (S).
13. Using hammer and drift, remove pin (T).
14. Using lifting device, remove overhead cylinder
(M) from vehicle.
15. Move overhead cylinder (M) to suitable work
area.
16. Remove sling.
TA251620
Go on to Sheet 4
Change 3
3-227
