TM 5-5420-278-24&P
0076 00
0076 00-4
PAINTING INSTRUCTIONS (Contd)
d. Operation of Automatic Mixer.
NOTE
To ensure mixing of proper proportions, completely empty the can.
1.
Add component B (black) (8) to component A (2).
2.
Insert tin containing component A (2) in the retaining tin (3) and secure the tension lock (4).
3.
Mount spiral stirrer (6) in drill (9).
NOTE
Components should be sufficiently homogeneously blended after
approximately 5 minutes.
To ensure proper bonding, component mixture must be used
within 40 minutes at 68°F (20°C).
4.
Blend component B (8) in the upper third of the tin containing component A (2). Proceed slowly to
the bottom of the tin, stirring in an even, counterclockwise direction.
e. Filling the SVV 50 Gun.
1.
Insert the pressing plate (1) into the tin containing component mixture (10). Press plate (1)
downwards until the opening in the center of the plate is filled with sealant.
2.
Remove nozzle head of the SVV 50 gun (7) and insert the gun (7) into the center opening of the
pressing plate (1).
3.
Position red valve lever, located at bottom of gun handle, for suction mode.
NOTE
For most efficient suction of component into gun, ensure gun
remains in as perfect of a perpendicular position as possible.
When pressing plate comes to a standstill, the gun tube is filled
with sealant.
4.
Actuate gun trigger and press gun securely against pressing plate (1). Pressing plate (1) will begin
to lower.
5.
Release gun trigger and shift red valve lever (5) to pressure position.
6.
Apply component per task B, step 1.
