TM 5-5420-280-10
0024 00
TRANSLOADING PALLET FROM PALLETIZED LOAD SYSTEM TRAILER (PLST)
(Contd)
12. Hold joystick (1) to UNLOAD until bottom tip of LHS hook arm (2) is just
below level of pallet hook bar (3).
13 Turn cab HIGH IDLE switch (5) to OFF.
CAUTION
Prior to backing CBT, ensure PLS trailer drawbar is all
the way in, or damage to equipment may result.
14. Back up transporter until LHS hook arm (2) engages pallet hook bar (3).
1
3
2
4
15. Turn LHS MODE SELECT switch (4) to No. 1 (AUTO) position or REMOTE
CONTROL (late model CBTs).
5
16. Remove LHS RCU (12) from RCU stowage box (11), connect power cable
cannon plug (9) to receptacle (10), if removed, and place POWER switch (13)
in ON position.
17. Apply service brake (8), move transmission selector lever (7) to N (neutral),
and push parking brake control (6) in. Place wheel chock in front of 2nd front
wheel and let foot off service brake (8).
0024 00-6
