TM 5-5420-280-23&P
0015 00
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (Contd)
Table 1. Preventive Maintenance Checks and Services for Pallet (Contd).
ITEM
ITEM TO
EQUIPMENT NOT
INTERVAL
PROCEDURE
NO.
CHECK/SERVICE
READY/AVAILABLE IF:
WARNING
Winch wire rope may be frayed. Wear
heavy leather gloves when handling
winch cable, and do not run hands on
wire rope. Failure to comply may result
in injury to personnel.
CAUTION
When performing PMCS on pallet, do
not stand or sit on hydraulic lines,
tubing, limit switches, or mounting
brackets. Failure to comply may result
in damage to equipment.
NOTE
Perform steps 37 through 53 with
bridge removed.
37
Annual
Winch motor (1),
a. Check winch motor for loose or missing
a. Any loose or missing
wire rope (3), and
hardware.
hardware.
hydraulic lines (2)
b. Check hydraulic lines for loose mounting
b. Any loose or missing
hardware, damaged lines, or leaking lines
hardware, damaged
or fittings.
lines, or Class III
leaks noted.
c. Check winch wire rope for signs of
c. Winch wire rope is
pigtailing, unwrapping, broken wires, frays,
kinked, frayed,
or damage. Refer to WP 0057 00.
damaged, or signs of
pigtailing,
unwrapping or has
more than six
d. Repair or replace damaged, loose, or
broken wires in 1
missing hardware. Refer to WP 0057 00,
in. length of cable.
WP 0068 00,and WP 0069 00.
38
Annual
Winch limit
Check limit switches for damage or broken
Limit switches broken
switch (4)
electrical wires. Refer to WP 0056 00.
or damaged, broken
wires, or out of
2
adjustment.
1
~
3
2
Change 1
0015 00-24
