TM 5-5420-280-23&P
0037 00
PALLET WHEEL HUB MAINTENANCE (Contd)
INSTALLATION
1. If removed, install cup bearings (6) and (8) on wheel hub (7).
NOTE
Pack bearings with grease and apply a light coat of grease to
spindle and sealing ring at installation.
2.
Install distance ring (11) on spindle (12).
3.
Install inner cone bearing (9) and new sealing ring (10) on wheel hub (7).
4.
Install wheel hub (7) on spindle (12) with outer cone bearing (5), washer (4), and nut (3).
5.
Rotate wheel hub (7) and tighten nut (3) until wheel hub (7) is tight, then back off nut (3) one half
turn.
6.
Align hole in spindle (12) with slot in nut (3) and install new cotter pin (2).
7.
Install cap (1) on wheel hub (7).
8.
Install wheel and tire. Refer to WP 0036 00.
1
2
3
4
5
6
7
8
9
10
11
12
END OF WORK PACKAGE
Change 1
0037 00-4