TM 5-5420-280-23&P
0078 00
FRONT EXPANDING CYLINDERS HYDRAULIC FLOW DIVIDER, MAIN EXPANDING CYLINDERS
HYDRAULIC FLOW DIVIDER, REAR EXPANDING CYLINDERS HYDRAULIC FLOW DIVIDER,
FORWARD SUPPORT WHEEL CYLINDERS FLOW DIVIDER, AND REAR SUPPORT WHEEL CYLINDERS
FLOW DIVIDER REPLACEMENT (Contd)
REMOVAL
CAUTION
Cap or plug all hoses, connections, and openings immediately after
disconnection to prevent contamination. Remove caps or plugs prior
to installation. Failure to do so may result in damage to equipment.
NOTE
Tag tubing for installation.
Have container ready to catch oil.
a. Front Expanding Cylinders Flow Divider
1.
Loosen nuts (13) and (16) and remove steel tubes (12) and (17) and tube seals (6) from two
elbows (14) on fittings (11) of front flow divider (5). Discard tube seals (6).
2.
Loosen two nuts (15) and remove elbows (14) from fittings (11) on front flow divider (5).
3.
Loosen nut (2) on steel tube (3) at fitting (7) on front flow divider (5).
4.
Remove three locknuts (19), washers (18), screws (9), washers (10), and front flow divider (5) from
steel tube (3), tube seal (6), and bracket (1). Discard locknuts (19) and tube seal (6).
5.
Remove two fittings (11), fitting (7), and three O-rings (8) from front flow divider (5). Discard
O-rings (8).
3
2
4
1
5
19
6
18
7
8
8
11
8
10
17
9
11
16
6
15
14
14
6
12
13
0078 00-2