• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
HYDRAULIC SUPPORTING WHEELS CONTROL VALVE, SELECTOR VALVE, PRESSURE REGULATOR VALVE, PRESSURE GAUGE, AND PUMP REPLACEMENT - Continued
HYDRAULIC SUPPORTING WHEELS CONTROL VALVE, SELECTOR VALVE, PRESSURE REGULATOR VALVE, PRESSURE GAUGE, AND PUMP REPLACEMENT - Continued

Special Tools List For Rapidly Emplaced Bridge (Reb) Page Navigation
  446    447    448    449    450  451  452    453    454    455    456  
img
TM 5-5420-280-23&P
0081 00
HYDRAULIC SUPPORTING WHEELS CONTROL VALVE, SELECTOR VALVE, PRESSURE REGULATOR
VALVE, PRESSURE GAUGE, AND PUMP REPLACEMENT (Contd)
SELECTOR VALVE AND PRESSURE REGULATOR VALVE REMOVAL
1.
Loosen nut (30) and remove tube (35) and tube seal (5) from elbow (28) on adapter (38). Discard
tube seal (5).
2.
Loosen nut (26) and remove tube (29) and tube seal (5) from elbow (27) on tee fitting (9). Discard
tubes seal (5).
3.
Loosen nuts (10) and (11) and remove elbows (27) and (28) from adapter (38) and tee fitting (9) on
selector valve (46).
4.
Loosen nut (36) and remove tube (34) and tube seal (5) from bottom of tee fitting (9). Discard tube
seal (5).
5.
Loosen nut (8) and remove tee fitting (9) from adapter (7) on selector valve (46).
6.
Loosen nuts (40) and (43) and remove tubes (41) and (42) and two tube seals (5) from adapters (39)
and (44) on bottom of selector valve (46).
7.
Loosen nuts (4) and (1) and remove tubes (3) and (2) and tube seals (5) from adapters (6) and (47)
on top of selector valve (46). Discard tube seals (5).
8.
Loosen screw (31) and remove handle (32) from selector valve shaft (45).
9.
Remove two screws (14) and selector valve (46) from A-frame bracket (15).
10.
Remove adapters (47), (6), (7), (38), (39), and (44) and six O-rings (37) from selector valve (46).
Discard O-rings (37).
NOTE
Tag tubing for installation.
11.
Loosen nut (33) and remove tube (34) and tube seal (5) from adapter (25) on pressure regulator
valve (21). Discard tube seal (5).
12.
Loosen nut (22) and remove tube (23) and tube seal (5) from adapter (24) on bottom of pressure
regulator valve (21). Discard tube seal (5).
13.
Loosen nut (19) and remove tube (18) and tube seal (5) from adapter (17) on pressure regulator
valve (21). Discard tube seal (5).
14.
Remove two locknuts (12), washers (13), screws (20), and pressure regulator valve (21) from A-frame
bracket (15). Discard locknuts (12).
15.
Remove adapters (17), (24), and (20) and three O-rings (16) from pressure regulator valve (21).
Discard O-rings (16).
0081 00-4


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.