TM 55-1945-205-10-2
0044 00 4
0044 00
e.
Install bolt (7) in the flexor lifting device (1) and flexor insert (2).
{1} Install nut (6) on bolt (7).
{2} Tighten nut (6) until snug.
5.
Repeat procedure for second flexor insert.
REMOVE TOWING BRIDLE
1.
Remove shackle securing towing bridle (8) to flexor inserts (2).
2.
Remove shackle pin (11) and shackle (10) securing towing bridle (8) to flexor insert shackle (13).
3.
Remove towing bridle leg (12) from flexor insert (2).
4.
Repeat steps to remove second leg of towing bridle (12) from flexor insert (2).
5.
Install shackles (10) and shackle pins (11) on both legs of towing bridle (12).
6.
After bridle has been cleaned and dried on deck of RRDF (9), stow towing bridle in BII container.
7.
Clean flexor inserts with fresh water.
8.
Place flexor inserts in BII container.
END OF WORK PACKAGE
8
10
10
12
13
12
2
2
9
9
11
