TM 55-1945-205-10-20113 00 30113 00Grease, Cindol (Starter and Pinion Lube) (Item 15, WP 0120 00)Grease, Outboard Motor (Item 17, WP 0120 00)Hydraulic Fluid, Petroleum Base (Trim/Tilt and Power Steering) (Item 21, WP 0120 00)Kit, HPF Lube (Item 22, WP 0120 00)Oil FiltersOil filters shall be serviced/cleaned/changed, as applicable, at prescribed hard time intervals. Army Oil Analysis Program (AOAP)The components of the RRDF are not enrolled in the Army Oil Analysis Program. Hardtime intervals apply.Warranty InformationFor equipment under manufacturer’s warranty, hard time oil service intervals shall be followed. Intervals shall be shortened if lubricants are known to be contaminated or if operation is under adverse conditions, such as: longer than usual operating hours, extended idling period or extreme dust. Cleaning And LubricationProper cleaning and lubrication can aid in avoiding possible problems or trouble, so make it a habit to do the following:&,21Follow all cleaning and lubrication instructions carefully. Failure to do so could result in damage to equipment.1.Thoroughly wash all equipment exposed to salt spray with clean, fresh water.2.Clean parts to be lubricated with cleaner, type II, MIL-C-29602, or equivalent. Do not use fluid or semi-fluid lubricant on SFD coated surface. Wipe surface dry before lubricating.3.Clean grease fittings before lubrication.TRIPLE-GUARDGREASEGEARCASE LUBE
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
