TM 55-1945-205-10-2
0005 00 1
0005 00
OPERATOR MAINTENANCE
ROLL-ON/ROLL-OFF DISCHARGE FACILITY
DESCRIPTION AND DATA
EQUIPMENT CONFIGURATION
General
Following are four typical configurations that may be used as roll-on/roll-off discharge platforms for sealift vessels
and/or watercraft lighters. The actual configuration will be determined by the watercraft and equipment being loaded/
off loaded, if it is to be used at a side ramp or stern ramp of the sealift vessel, Sea State conditions and the operating
area. The beach/sea end modules may be used in different alternate configurations for loading/off loading watercraft
lighters. These are installed on the outboard end of a platform in place of the end rake modules.
Full RRDF Side Configuration
FULL RRDF SIDE CONFIGURATION
5 FT BY 10 FT
FENDER
6 FT BY 12 FT
FENDER
FENDERS
CORNER FENDER
EASY
5 FT BY 10 FT
FENDERS
6 FT BY 12 FT
FENDER
5 FT BY 10 FT
FENDERS
FENDER
CORNER
FENDER
CORNER FENDER
CORNER FENDER
4 FT BY 12 FT
FENDERS
4 FT BY 12 FT
DUNNAG E M AT
DUN NAG E M AT
5 FT BY 10 FT
6 FT BY 12 FT
FENDER
GENERATOR
SHELTER
PERSONNEL
SHELTER
LIFE RINGS
