TM 55-1945-205-10-4
0003 00 19
0003 00
TOWING BRIDLE, TOWING INTERFACE AND TOWING LIGHTS
Location
The towing bridle is attached to flexor interface. It is stowed in the BII container when not in use.
The towing interface is attached to the FC end rakes. It is stowed in the BII container when not in use.
The towing lights are attached to the left side (red lens), right side (green lens), front center (white lens) and the aft
end (amber lens) when towing the FC. The lights are stowed in the BII container when not in use.
Description
The towing bridle consists of a 500 ft long X 10 in. circumference nylon line and a 2 1/8 in. pear link connected to
spliced in eyes and thimbles of the two bridle legs. The bridle legs, are 10 in. circumference, 12 strand plaited nylon
line 35 ft long. Each leg of the towing bridle has a shackle use to attach the legs to the flexor interface at the FC and
other end to the warping tug.
The towing interface is used along with the towing bridle to tow the FC up through Sea State 5 conditions. A flexor
receiver insert and a flexor receiver insert lifting device is used to install the insert for towing.
There are four types of towing lights used during towing of the FC. The towing lights are identified by the color of the
lens, which are white, green, red and amber. The lenses are interchangeable and are adjustable for aiming purposes
during towing operations. These lights are battery operated and have magnetic bases so no adaptors are needed
for installation.
TOW ING BRIDLE
FLEXOR RECEIVER INSERT
FLEXOR RECEIVER INSERT
LIFTING DEVICE
TOW ING INTERFACE