TM 55-1945-205-24-2
0336 00 2
0336 00
2.
Loosen hex nut (2) of negative lead terminal (3).
3.
Using a battery terminal puller, remove negative lead terminal (3) from battery negative post (5).
4.
Position negative lead (4) out of way to prevent contact between the negative lead terminal (3) and battery
negative post (5).
INSTALL RHIB BATTERY NEGATIVE LEAD TERMINAL
1.
Position negative lead terminal (3) over negative post (5).
2.
Carefully press negative lead terminal (3) down on negative post (5).
3.
Tighten negative lead terminal hex nut (2).
4.
Perform operational check of RHIB. (TM 55-1945-205-10-2)
END OF WORK PACKAGE
