TM 55-1945-205-24-2
0349 00 3/4 blank
0349 00
WARNING
4.
Dispose of contaminated wiping rags in accordance with local procedures.
INSPECT QUICK RELEASE AND MOORING ASSEMBLY
1.
Inspect swaged cables (9) on both hitch pins (1) and load release hook (8) for fraying or damage.
Replace damaged items.
2.
Inspect hitch pins (1), clevis block (4), load release hook (8), master & half link (10,11), sling hook (12),
hammerlock coupling link (13), chain (2) and eye slip hook (14) for wear, broken components, corrosion and
proper operation. Replace damaged items.
3.
Inspect kinetic link assemblies (3) for wear or deterioration of the connector links (15) and worn or deteriorated
tiedown straps (16) or rubber grommets (17). Replace damaged items.
4.
Inspect chain sleeve (18) for wear or deterioration. Replace damaged items.
5.
Inspect two load release hook nuts (6) and bolt (7) for worn or stripped threads. Replace damaged items.
ASSEMBLE QUICK RELEASE AND MOORING ASSEMBLY
1.
Remove slotted nut (6) and bolt (7) from load release hook (8).
2.
Position lower end of the kinetic link assemblies (3) on load release hook (8) and secure with bolt (7) and slotted
nut (6). Tighten slotted nut (6).
3.
Install new cotter pin (5) through bolt (7) to retain slotted nut (6).
4.
Position kinetic link assemblies (3) on clevis block (4) and secure with hitch pin (1).
5.
Position chains (2) on clevis block (4) and secure with hitch pin (1).
END OF WORK PACKAGE
