TM 55-1945-205-24-2
0217 00 3
0217 00
e.
Remove nut (15) and bolt (16) securing inner tube cable (1) to lower end of the inner tube (14).
f.
Remove inner tube cable (1).
2.
Remove middle tube cable (17).
a.
Remove four nuts (18), washers (19) and screws (20) securing two slides (21) on the upper end of outer
tube (22).
b.
Remove cotter pin (23), pin (24) and pulley (25) from outer tube mount bracket (9). Discard cotter pin (23).
c.
Remove both middle tube (6) and middle tube cable (17) from inside outer tube (22).
d.
Remove nut (26) and bolt (27) securing middle tube cable (17) to lower end of middle tube (6).
e.
Remove middle tube cable (17).
INSTALL LIGHT TOWER - TOWER EXTEND CABLES
1.
Install new middle tube cable (17).
a.
Secure middle tube cable (17) to lower end of the middle tube (6) with bolt (27) and nut (28). Tighten nut (26).
b.
Install both middle tube (6) and middle tube cable (17) in outer tube (22).
c.
Install pulley (25), pin (24) and new cotter pin (23) on outer tube mount bracket (9), looping the middle tube
cable (17) over pulley (25).
d.
Install two slides (21) on the upper end of outer tube (22) and secure with four screws (20), washers (19) and
nuts (18). Tighten nuts (18).
2.
Install new inner tube cable (1).
a.
Secure inner tube cable (1) to lower end of the inner tube (14) with bolt (16) and nut (15). Tighten nut (15).
b.
Install both inner tube (14) and inner tube cable (1) in middle tube (6).
c.
Install pulley (12), pin (11) and new cotter pin (10) on middle tube mount bracket (13), looping the inner tube
cable (1) over pulley (12).
d.
Secure the upper (loop) end of the inner tube cable (1) to outer tube mount bracket (9) with pin (8) and
cotter pin (7).
e.
Install two slides (5) on the upper end of middle tube (6) and secure with the four screws (4), washers (3) and
nuts (2). Tighten nuts (2).
3.
Install light tower electrical system junction box cable. (WP 0136 00)
4.
Install light tower - tower electrical cable shroud. (WP 0215 00)
5.
Raise telescopic light tower assembly. (TM 55-1945-205-10-2)
6.
Install light tower - tower extend winch. (WP 0213 00)
7.
Install light tower pivot support. (WP 0209 00)
