TM 55-1945-205-24-2
0232 00 1
0232 00
DIRECT SUPPORT MAINTENANCE
ROLL-ON/ROLL-OFF DISCHARGE FACILITY
LIGHT TOWER DOOR LATCH
REPLACEMENT
INITIAL SETUP:
Tools
Tool Kit, General Mechanic’s (Item 81, WP 0359 00)
Gloves, Men’s and Women’s (Leather Palm) (Item 27, WP 0359 00)
Goggles, Sun, Wind and Dust (Safety) (Item 29, WP 0359 00)
Helmet, Safety (Brown) (Item 33, WP 0359 00)
Life Preserver, Vest (Item 38, WP 0359 00)
Compressor Unit, Reciprocating, Power Drive (Item 13, WP 0359 00)
Bar, Bucking, BB28 Tool Style (Item 3, WP 0359 00)
Drill, Electric, Portable, 115 Volt (Item 16, WP 0359 00)
Drill Set, Twist (Item 15, WP 0359 00)
Hammer, Pneumatic, Portable (Rivet Gun) (Item 31, WP 0359 00)
Materials/Parts
Latch, Door
(33968)
PN 36793602
Rivet
(33968)
PN 36794816
Qty 4
Personnel Required
Engineer 88L (2)
Equipment Condition
Light Tower Battery Negative Lead Terminal Removed. (WP 0134 00)
REMOVE LIGHT TOWER DOOR LATCH
WARNING
All personnel must wear personal flotation device, hard hat, safety shoes and gloves
during RRDF operations and maintenance. Failure to observe these precautions
could result in serious injury or death.
NOTE
The following procedure is typical for the removal and installation of port and starboard light
tower door latches.
1.
Drill out four rivets (1) from door latch (2) using a drill and twist drill. Discard rivets (1).
