TM 55-1945-205-24-4
0191 00 9/10 blank
0191 00
a.
Rotate hub (2) slowly while pushing inward.
b.
Continue to push inward until inner bearing (9) and new seal (8) are completely seated on axle (6).
c.
Install outer bearing (7) in hub (2).
d.
Install washer (5) and nut (4) on axle (6).
7.
Using a torque wrench, torque nut (4) to 600 in. lbs (68 N-m).
8.
Back castle nut (4) off until next available slot in castle nut (4) lines up with hole in axle (6).
9.
Install new cotter pin (3) through the end of axle (6) and nut (4).
10. Bend cotter pin (3) over to secure in place.
11. Install dust cap (1) over nut (4) in hub (2).
12. Install light tower running gear wheel and tire assembly. (WP 0189 00)
END OF WORK PACKAGE
