• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
test resistance between slip rings
ALTERNATOR REPAIR INSTRUCTIONS (Continued) - TM-5-1940-277-34_105

TM-5-1940-277-34 Boat Bridge Erection Twin Jet Aluminum Hull Model USCSBMK1 (1940-01-105-5728) Manual
Page Navigation
  82    83    84    85    86  87  88    89    90    91    92  
TM 5-1940-277-34 ALTERNATOR REPAIR INSTRUCTIONS (Continued) LOCATION ITEM ACTION REMARKS 10. Rotor (19) a. Examine visually for signs of cracking, denting, chipping or rubbing. b. Examine field windings for deterioration of insulation and secured in place. c. Check insula- Use multimeter tion between (see figure). each slip ring and rotor shaft. Minimum 10 Megohm. d. Test resis- Use multimeter. tance between two slip rings (9.4 - 9.8 ohm acceptable). e. Replace rotor assembly if it fails to con- form to a, b, c or d. 11. Slip ring (34) a. Examine for Pitting and Scoring. b. Replace if defective. 2-73







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.